Monday, October 31, 2011

How Do I Set Up A Freshwater Aquarium?

!: How Do I Set Up A Freshwater Aquarium?

Tank Placement

Choose exactly where you would like to place your fish tank; as it will determine what size you purchase, and whether you'll have to have a stand to go with it. 20 gallons and up will require a stand no matter what. As appealing as it is to purchase a small fish tank they actually are not as easy to maintain beneficial water quality. Purchase a 20 gallon fish tank for your starter tank and keep only a few fish. This will help you decide if you enjoy the hobby. Contemplate not subjecting any fish to a "fishbowl". They have a tendency to suffocate the fish either by insufficient oxygen or by their own waste materials. The main things to make note of when selecting the position for your fish tank:
A lot of sun light will result in substantial algae growth and a upkeep problem. An interior wall, clear of bright light, is advisable. It's also crucial that you take into account the ability of the floor to support the load of your fully loaded fish tank. Ensure that there's sufficient structural support under the floor. Select a position close to a power outlet, and bear in mind how far you'll have to carry water for your weekly fish tank maintenance!

Choosing a Fish Tank

Choose a fish tank that will fit the area you've decided on. This is the identical for whatever size aquarium you choose. Also take into account the kind of fish you want to keep, you'll need a fish tank large enough for their adult size. Thinking about live plants? Consider a higher fish tank which will give them the height to grow, but take into account that suitable lighting for various kinds of plants may be pricey (particularly if the fish tank is tall).
Get a fish tank stand that is made for the size of your tank. Search for complete aquarium kits at those big pet retailers. Utilized setups from internet sites like Craigslist tend to be readily available for great prices, be sure that you check for leaks and clean it very well before use. Don't underestimate the load of a full aquarium! Ensure that the stand is either rated for the dimensions of your fish tank or that it's been custom made to be very sturdy. Such things as dressers or T.V. stands aren't robust enough.
If you don't purchase a complete setup, be sure the equipment you pick is rated for the size of your fish tank.
Filtering the tank

Determine which filtration system you intend to use, the most typical and least complicated are either under gravel filters or power filters that hang on the rear of the fish tank. Don't get swept up in technology. Penguin and Whisper power filters provide both mechanized and biological filtration and are simple to clean and use.
Should you decide on an under gravel filter, be sure that the air-pump or powerhead you purchase with it is strong enough for the size of the fish tank. In cases like this, bigger is far better. Remember that in case you don't consistently vacuum the gravel it is going to clog up the under gravel filter and transform it into a killing zone. Remember that you can't make use of an under gravel filter if you are considering having sand or some other fine substrates. The substrates that you use, will be determined by the fish you will keep, and this in turn will help determine the filtration system.
If you opt to go with a power filter, choose one which will move sufficient water for the size of your fish tank. Preferably, it ought to move five gallons of water per hour, per gallon of your fish tank capacity. As an example: a ten gallon. fish tank will need a filtration system that circulates at the very least 50 gallons per hour.
Heating the tank

Make sure you get a heater if one doesn't already come with your fish tank, the fully-submersible types are definitely the simplest to utilize. Look for one with a variable thermostat, given that different fish prefer different temperature ranges. An excellent rule of thumb is 3-5 watts of heat for every gallon of water.

Get Substrate

Pick gravel or sand for the bottom; this is essential for a healthy fish tank (approximately. 2-3 inches). Cheap gravel and sand can be bought from home improvement stores. Sand is ideal for fish that like to dig but it must be stirred regularly to stop dead spots that will create havoc on your fish tank.

Search for leaks

Fill the fish tank with about two inches of water, and then wait for thirty minutes. If there are actually any leaks, it is far better they show up now, instead of when you've filled the whole thing.

Basic Setup

If all is well, open your bags of gravel, and give them a very good wash under running water in a colander. The less dirt in the water, the quicker it'll clear once the filtration system is started up. This phase is particularly crucial if you're using sand rather than gravel.
For undergravel filters, position the filter plate in, and ensure the lift tubes are fitted. (For those who have a submersible power-head, you should only need one; using a traditional air pump, two are ideal for most fish tanks less than 40 gals, one at each end.)
Distribute the rinsed gravel in an even covering over the top of the filter.
Fill the fish tank with water to just underneath the rim of the fish tank, usually a gap of 1" will do.
If you've decided on an external power filter, arrange it on the back of the fish tank in a location in which the outflow will evenly disperse the water. Some aquarium lids have spaces designed for you to place your equipment.
Fill the reservoir of the filtration system with water, and turn it on! Water should smoothly circulate after a few minutes.
Connect your pump air-lines or power-head to the appropriate lift tube(s) now, if you've got an undergravel filter.
Turn on the powerhead/pump. Water should begin moving vertically within the lift tube(s).
Mount your heater on the inside of the fish tank. The majority of the thermostats on new heaters now come pre-set at a suitable temperature range of 70-77 degrees Fahrenheit (21-25 degrees Celsius). Turn on the heater and install your thermometer.
Put in place any plants or decorations. Plants are practical decorations. It is not easy to get mechanical filter handle plankton or algae bloom. Vegetation makes it easy. For a few fish, plants are compulsory. With tall aquariums, position plants with the fish tank only half full, so that you don't have to immerse your whole arm.
Wait for an hour or so, and check that the temperature is still within the safe range, that you have no leaks, and that the water is circulating correctly.
Add the water dechlorinator, in accordance with the directions on the bottle (in case you have not used purified drinking water)
Cycle Your Aquarium The cycling of the aquarium can be done in various ways. One way is to add one or two inexpensive fish, suitable for the water conditions, to the tank, and watch for the amonia and nitrite levels to ensure they don't spike.

Choose Fish

Talk about what sort of fresh water, tropical fish you want to have with the sales person. Enlighten yourself in fish forums on the web about your favorite kind of fish. They ought to give you tips on who can and can't get along, and so forth. Watch out though, some sales staff may not have experience with aquariums and as a result can provide very poor advice. See if there is a locally-owned fish store in the region, they have a tendency to offer the most accurate information and facts as well as high-quality fish.

Adding Fish

Start out with two or three fish the first ten days, then get two or three more, wait another ten days, and so on. If you place too many fish at one time into a new fish tank, the water will not be capable to properly cycle, and will quickly turn harmful. Patience is the key for the first six to eight weeks. That mentioned, a significant error people make is to purchase schooling fish but only get 1 or 2 of them. This is stressful and cruel for the fish. A school implies that a group of 5 is the bare minimum.

Tips
Always research the requirements of any living thing (fish, plant, or invertebrate) going into your fish tank. Make certain they are suitable with what you currently have and that you can satisfy their maintenance needs. It is best to get your information and facts from many sources, don't instantly rely on what the store staff tells you!
Under gravel filters are becoming less and less preferred for a number of factors; they don't perform as effectively as a Hang on back/power filter, they can be noisy, and they will need more upkeep.
If you decide on an under gravel filter, the gravel will need to be vacuumed regularly to get rid of built up organic material. Failure to do this thoroughly can result in excessive ammonia or nitrite levels and fish death.
Over time, valuable microorganisms develop on the surfaces within the aquarium that assist to process ammonia and nitrite. Introducing a large quantity of fish at once can overcome these microorganisms, challenging your filtration system heavily. An aquarium with only a few fish will typically cycle in approximately 30 days, which means the microorganisms will become nicely established and can "keep up" with the fish waste products. Introducing more fish does not speed up this process.
If you are having a challenging time keeping the fish tank clear, think about making use of live plants. They keep the fish tank from getting murky and look good. Just make sure that you purchase them from a pet store so that they won't harm the fish.
5 gallons of water weighs in at nearly 42 lbs. This should help you determine whether or not you have anything that the fish tank will safely sit on. Anything over 15 gallons will almost certainly require a special stand.
If you have a option of light bulb in the light fixture, go with fluorescent - it shows off fish colors much better, and yields much less heat.
Research, research, research!! Try to find out what the conditions of your municipal water are. There are different kinds of fish suited to live in "hard" or "soft" water, and fish living in the correct water conditions will live longer and be more healthy. Unless you are willing to treat all the water going into the tank (can be expensive and/or time consuming), choosing a setup adapted for your local water can really make your life easier!

Warnings
Don't put the tank in or close to a window as this will cause the water to overheat, and also encourage algae to grow. This is not a problem for a fishless tank.
Resist the urge to buy a lot of fish as soon as you set up your tank! The conditions in a recently established aquarium can vary a great deal, which can be fatal to fish.
Real sea shells that you discovered on the beach could be poisonous to your fish - remember this is a fresh water aquarium.
Never clean the tank sides with a spray bottle, and certainly not ammonia.
Compare the rate of staff turnover at the shops available in malls with stores in which you can actually get to know the owners. As that rate descends, the level of quality of information and facts from your staff ascends.
Try to avoid lifting an empty aquarium by its rim - the rim might break or come off, which will endanger the structural integrity of the aquarium. Large aquariums typically require a compression pad underneath.
Some models of heater will become dangerous when they are dry and on.
Under NO Circumstance should you buy fish by how cute they are. That sweet little fish may well be the terror of the seas when it gets bigger.
Think about breeding feeders and danios before you purchase carnivores like cichlids, sharks or oscars.
Pay attention to staff with regards to liveliness. By no means buy fish if they have any sores, spots or other defects.
Do not tap on the glass. The fish will become scared and irritated.
Ammonia, nitrate, and phosphate build-up in a fish tank should tell you to change your water and plant your aquarium. pH (alkalinity) testing is pretty much required. Take in a water sample when you go to the pet store.


How Do I Set Up A Freshwater Aquarium?

Top Rated Leaf Blower Free Shipping Cheap Circulating Pump Hot Water

Saturday, October 22, 2011

External vs. Submersible Pumps. Which One Should You Use?

!: External vs. Submersible Pumps. Which One Should You Use?

For many people, it's never been a question of whether to use a
submersible pump vs. an external pump because most people have
smaller ponds and are used to just using a submersible pump.
They're easy to install, and are pretty reliable - so why even
consider an external pump?

There are a couple of reasons...

But before we go into that, let's briefly talk about the benefits
of submersible pumps first. For obvious reasons, a submersible
pump is named as such because it is designed to be placed in the
pond, and submerged under the water.

These are the easiest of all pumps to install, just drop them in
the water and plug them in - and you’re ready to do. Of course,
you might have some quick plumbing to do, attaching a hose to the
waterfall or to a submersible filter (another article entirely),
but other than that - that's pretty much all there is to it.

Submersible pumps range in size or gallons per hour, from 50 GPH
all the way up to 50,000 gallons per hour, but for most ponds -
pumps anywhere from 350 GPH to 4000 GPH will do just fine...

So why might you also consider an external pump instead?

Here are a couple reasons. First, external pumps can much more
energy efficient. Now, a typical swimming pool or spa pump won't
usually fall into this category - so be careful not to compare
apples to oranges! Pool pumps can also be huge energy hogs, so
always check the amps to compare different pumps together.
Anything over 10 amps will draw a significant amount of $$ out of
your pocket every month in electrical costs.

The external pumps that we are talking about are designed
specifically for ponds and water gardens, and are engineered for
energy efficiency. I'm not sure why those folks in the swimming
pool and spa industry haven't figured out how to this yet, but
I'm sure they'll catch on sooner or later.

I'm inclined to think the average pond owner is a bit more
intelligent than the average pool owner. Why else would someone
choose a pool over a pond? Unless of course you have both, but at
any rate - let's just assume that we're talking about external
pond pumps here.

For comparison, a typical 4000 GPH (gallons per hour) submersible
pond pump will typically draw anywhere from 10 amps all the way
up to 15 amps, depending on the brand. This can really burn a
hole in your wallet (or pocketbook) on a monthly basis, and in
some parts of the country will run you - in energy costs.

In contrast, a comparatively rated external pond pump like the
William Lim Wave I External Pump
([https://www.macarthurwatergardens.com/Pumps/wave_pump_for_ponds.htm])
is rated at 4380 GPH at 3.47 feet of head, and only draws 2.3
amps - that's 3/4 less energy consumption than the submersible
pumps.

When you start getting into larger ponds, 1000 gallons up to
20,000 and above - it's usually a good idea to look into these
more energy efficient pumps. For example, the 3/4 HP Dragon pump
([https://www.macarthurwatergardens.com/Pumps/dragon_pumps.html])
will move 7,770 GPH at almost 5 feet of head (and under pressure)
and only burn 6.2 amps.

External pumps are almost always better for using with
pressurized external filters as well, as submersible pumps are
not designed to handle all the back pressure. Other benefits of
using an external pump include:

-> Easy to clean without getting your hands messy

-> Come with a removable leaf trap which clog less often

-> Easy to hook up to bottom drains or surface skimmers

-> Generally last longer, and easier to repair / replace parts

So that's it, more than enough information for you to make an
educated choice.

Just to recap:

For smaller ponds, and for simple installation and daily use,
submersible pumps are probably your best option. For larger
ponds, 1000 gallons and above, it may be worth looking into an
external pump for your needs. Although they cost a little more
on the front end, the energy savings alone can often more than
offset this increase in cost during the first year of use alone.


External vs. Submersible Pumps. Which One Should You Use?

!: Buy Asanti Wheels - True Build To Order Custom Wheels.


Twitter Facebook Flickr RSS



Français Deutsch Italiano Português
Español 日本語 한국의 中国简体。